Furuno 2837SW Manual De Usuario

1. MOUNTING 

 
 

The control unit may be mounted on a desktop, with or without the KB fixing metal 

(supplied), which mounts the control unit at an angle. 

 

When selecting a mounting location, keep in mind the following points: 
•  Select a location where the control unit can be operated conveniently. 
•  Locate the unit away from heat sources because of heat that can build up inside the 

cabinet. 

•  Locate the equipment away from places subject to water splash and rain. 
•  Determine the mounting location considering the length of the signal cable between the 

control unit and the processor unit. (The 10m signal cable is attached to the control unit). 

•  A magnetic compass will be affected if the control unit is placed too close to the magnetic 

compass. Observe the compass safe distances on page ii to prevent deviation of a 

magnetic compass. 

 

Fixing with KB fixing plate 
1.  Fix the KB fixing plate to the bottom of the control unit. 

2.  Attach cushions (three for RCU-020, two for RCU-015FEA/016) to the bottom of the 

control unit as shown below. 

3.  Fix it to a desired location with self-tapping screws (local supply). 

Cushion

KB fixing plate