Furuno 2837swd Manual De Usuario

3. SETTING AND ADJUSTMENT 

Open the Installation Parameter dialog box as described on page 3-7. 

Activate changes now

Restart needed to activate

There are several buttons in this dialog box, and these are described below: 
 
Set parameters default 
This restores Installation parameters which are saved as a backup copy by service 
personnel. Use this function if you are not sure about Installation parameters values. 
 
Activate changes now 
This activates changes and closes the Installation parameters dialog box. 
 
Restart needed to activate 
This closes Installation parameters dialog box and activates changes after restarting the 
radar. 
 
Sensor Channel Usage 

This shows how the serial channels of LAN 
adapters are configured and which analog 
sensors are connected to the system through 
the B adapter.