Furuno FAR-2127 Manual De Usuario

3. SETTING AND ADJUSTMENT 
 
 

The image from both X-band and S-band radars may be shown together on one radar 
display. This allows you to take advantage of the best characteristics each type of radar has 
to offer. Two display formats are available, mixed and combine, and you may select desired 
format from the menu. 

Image from main radar

Image from 
external radar

External image overlaid on
internal image ("MIX" setting)

Separate internal and external
images ("COMBINE" setting)

The following should be done in order to enable the dual radar display: 

•  Set antenna position correctly on both the main radar and the external radar. 
•  Select external radar to use, from the DUAL RADAR menu. (See paragraph 

3.7.3.) 

Enable or disable the dual radar display as shown in this section.   

Note 1: The Tx blanking sector boundary lines are not shown when the dual radar display is 

active. Further, neither the internal or external image is shown in the Tx blanking 
sector. 

Tx blanking sector

Tx blanking sector

Display

 

area

Dual radar display with 
Tx blanking sector

Tx blanking sector not shown.
No image in Tx blanking sector.