Furuno FAR-2127 Manual De Usuario

4. INSTALLING OPTIONAL EQUIPMENT 

This kit is installed in the antenna unit of the FAR-2107/2807 series X-band radar to monitor 
radar performance. 

 Name: 

 

Performance 

monitor 

 Type: 

PM-31 

 Code 

no.:  008-080-438 

 Name 

Type 

Code 

number 

Qty 

Ԙ SCANNER COVER ASSY. 

PM-31 

008-539-430 

1 

ԙ GREASE 

GASKET GREASE #2 
50G

000-149-704 1 

Ԛ SM-XH CONNECTOR 

ASSY. 

03-2108

㧔6P-6P)

008-534-840 1 

ԛ LIFTING FIXTURE 

03-001-3264 

300-132-640 

1 

Ԝ GASKET 03-001-3263 

300-132-631 

1 

Procedure

To hoist the scanner cover assy. to the radar mast, by using rope, attach the lifting fixture 

ԛ to 

the scanner cover assy.

Ԙ.

1. Remove the bolt and chain at the bottom of the stern-side cover, and then remove the 
    cover. 
2. Coat the bolt hole on the scanner cover assy.

Ԙ  with silicone sealant (Adhesive 1211) 

    and secure the chain with the bolt. 
3. Remove the cover at the bow side also. 
4. Insert the XH connector of the SM-XH connector 

Ԛ  assy. to J911 on TB board 03P9349 

    and the SM connector of the SM-XH connector assy. to the relay plate. 
5. Coat the gasket 

Ԝ  with the gasket grease #2 50G  ԙ  and attach it to the scanner cover 

  assy.

Ԙ.

6. Connect the cable assembly coming from the scanner cover assy.

Ԙ  to the SM connector 

  attached at step 4 above.  
7. Attach the scanner cover assy. to the stern side of the antenna unit. 
8. Reattach the bow-side cover.