Furuno FAR-3230SW-BB Manual De Usuario
4-1
4.
AIS OPERATION
An AIS transponder can be connected to this radar to overlay AIS targets on the radar
display. The radar can store up to 2,000 AIS targets in its storage buffer. When this
buffer becomes full of AIS targets, the Alert 533 "AIS Target Capacity 100%" is gen-
erated to alert you to full storage buffer. The storage buffer contains automatic dead
reckoning for all AIS targets, which is based on reported Speed Over the Ground
(SOG), Course Over the Ground (COG), Rate Of Turn (ROT) and heading. The stor-
age buffer also contains calculation of range, bearing, CPA, TCPA, etc. The CPA and
TCPA limits set for dangerous targets are common for TT and AIS targets.
display. The radar can store up to 2,000 AIS targets in its storage buffer. When this
buffer becomes full of AIS targets, the Alert 533 "AIS Target Capacity 100%" is gen-
erated to alert you to full storage buffer. The storage buffer contains automatic dead
reckoning for all AIS targets, which is based on reported Speed Over the Ground
(SOG), Course Over the Ground (COG), Rate Of Turn (ROT) and heading. The stor-
age buffer also contains calculation of range, bearing, CPA, TCPA, etc. The CPA and
TCPA limits set for dangerous targets are common for TT and AIS targets.
This radar can activate 500 AIS targets. The Alert 535 "AIS Target Activate 100%" is
generated when 500 AIS targets are activated.
generated when 500 AIS targets are activated.
This radar can display a maximum of 1,000 AIS targets. The Alert 531 "AIS Target Dis-
play 100%" is generated when 1,000 AIS targets, which includes both activated and
sleeping targets, are displayed.
play 100%" is generated when 1,000 AIS targets, which includes both activated and
sleeping targets, are displayed.
The frequency for update of AIS transponder-sent data depends on speed and course
of tracked AIS target. The table below shows the IMO standardized reporting rates for
the AIS transponder. Based on the table below, the radar defines which AIS targets
are in tracking or lost. When you acknowledge a lost target alert, the corresponding
AIS symbol will be removed from the display.
of tracked AIS target. The table below shows the IMO standardized reporting rates for
the AIS transponder. Based on the table below, the radar defines which AIS targets
are in tracking or lost. When you acknowledge a lost target alert, the corresponding
AIS symbol will be removed from the display.
An AIS transponder "sees" all ships fitted with an AIS transponder belonging to either
a Class A or Class B AIS. Additionally, the AIS transponder receives messages from
ships and non-ships (AIS SAR aircraft, AIS aid to navigation, AIS base station, and
AIS search and rescue transmitter).
a Class A or Class B AIS. Additionally, the AIS transponder receives messages from
ships and non-ships (AIS SAR aircraft, AIS aid to navigation, AIS base station, and
AIS search and rescue transmitter).
Type of Ship
IMO
nominal
reporting
interval
Lost target
indication
(reporting
interval >)
(reporting
interval >)
Class A: Navigation status is “anchor” or “not under
command” or “moored” or “aground”, and SOG
command” or “moored” or “aground”, and SOG
≤ 3kn
3 min
10 min
Class A: Navigation status is “anchor” or “not under
command” or “moored” or “aground”, and SOG > 3kn
command” or “moored” or “aground”, and SOG > 3kn
10 s
50 s
Class A: 0kn
≤ SOG < 14kn
10 s
50 s
Class A: 14kn
≤ SOG ≤ 23kn
6 s
30 s
Class A: SOG > 23kn
2 s
10 s
Class B: “CS” SOG < 2kn
3 min
10 min
Class B: “CS” SOG
≥ 2kn
30 s
150 s
Class B: “SO” 0 kn
≤ SOG < 2kn
3 min
10 min
Class B: “SO” 2 kn
≤ SOG < 14kn
30 s
150 s
Class B: “SO” 14 kn
≤ SOG ≤ 23kn
15 s
75 s
Class B: “SO” SOG > 23kn
5 s
25 s
Class A and Class B: no SOG available
N/A
10 min
AIS SAR aircraft
10 s
50 s
AIS aid to navigation
3 min
10 min
AIS base station
10 s
50 s
AIS search and rescue transponder
N/A
10 min