Furuno FAR-3230SW-BB Manual De Usuario

14.  HOW TO MONITOR ROUTES

The instant track feature provides a temporary track, consisting of four waypoints, to 
return to or deviate from the monitored route. Correct data from navigation sensors is 
essential to this function.

There are two instant track modes: [Safe Off Track] and [Back to Track]. 
[Safe Off Track]: This mode provides a track from the monitored route to a safe loca-
tion to avoid collision or the like.
[Back to Track]. This mode creates a track to follow to return to the monitored route 
when the vessel goes outside the channel limits.

The mode is automatically selected according to whether a monitored route is active 
or not and the amount of off course. Further, if a monitored route is active while follow-
ing the instant track route, the instant track mode can be changed manually.

* An additional instant track route can continuously be created and monitored while 
monitoring the instant track route.

The parameters for the track (channel limit, turn radius, etc.) can be set on the [Instant 
Track] page. See section 21.2.

If it becomes necessary to deviate from the monitored route; for example, to avoid col-
lision, use the [Safe Off Track] mode to create an instant track to a safe location. An 
instant track can be created without a monitored route.

1. When the monitored route is active, 

click the [Instant Track] button on the 
InstantAccess bar to show the [Instant 
Track] dialog box. The message 
"Please click a destination." appears on 
the [Planning] page.
Note 1: If a monitored route is active, 
the [Back to Track] mode can also be 
selected.
Note 2: If a monitored instant track 
route is already active, an instant track 
mode different from the currently active 
one can be selected.

2. Click a destination. The location is marked with an orange circle and arrow. The 

message "Please click a point to decide an angle." appears in the [Instant Track] 
dialog box. The location must be within 50 NM of current position.

Neither monitored route nor instant track route active.*

[Safe Off Track]

No

•  Both monitored route and instant track route are active.*
•  The absolute value of off track is within the channel limit setting.

[Safe Off Track]

Yes

•  Both monitored route and instant track route are active.*
•  The absolute value of off track is outside the channel limit set-

ting.

[Back to Track]

Yes

Click here to show drop 

down list to select mode.

When monitored route is active