Furuno FAR-3230SW-BB Manual De Usuario

1.  OPERATIONAL OVERVIEW

The TT and azimuth stabilized presentation modes require own ship speed input and 
compass signal. The speed can be entered automatically from a speed log (STW, 
SOG) or GPS (SOG), or manually on the menu. Note that the FURUNO GPS Naviga-
tor GP-150 provides COG and SOG.

1. Right-click anywhere in the Sensor information, datum box to show the context-

sensitive menu.

2. Click [Select Sensor] then click [Setting].

3. Use the arrow buttons to select the [SPD] page.

4. For automatic input, follow the procedure below. For manual input, go to 

step 5.
1) Check [Sensors].
2) Set the priority for the speed sensors in case of Local sensor. Click the triangle 

on any line then select the sensor to set as the primary source of speed. All 
other sensors are then set as secondary source. Only one sensor can be pri-
mary while the others can be secondary. If a speed sensor is changed from 
secondary to primary state and another speed sensor was selected as prima-

System
Local

[Setting]

System

Local

Select Sensor

[OS Info Menu]

[Setting]

Sensor type 
selection

Speed 
sensor 
list

Check for manual 
speed input

Check for automatic 
speed input

Stablilization 
mode

Select to use radar 
as source for speed 
and course

Set speed and course of drift

Arrow buttons