Furuno FAR-3230SW-BB Manual De Usuario
2. RADAR, CHART RADAR OPERATION
2-15
5. Spin the scrollwheel to select 1, 2, 3 or 4 (Dynamic Range) or A, B, C (Curve) as
appropriate then push the left button. Refer to the description and illustration be-
low.
low.
1-4: Control dynamic range. 1 provides the widest dynamic range; 4 is the narrow-
est dynamic range.
A: The mid-level in the curve is low, so this setting is suitable for suppressing rain
clutter.
B: Curve between A and C.
C: The mid-level in the curve is high, so this setting is suitable for detecting distant
targets.
est dynamic range.
A: The mid-level in the curve is low, so this setting is suitable for suppressing rain
clutter.
B: Curve between A and C.
C: The mid-level in the curve is high, so this setting is suitable for detecting distant
targets.
6. Click [9 CONDITION].
7. Click [1 STC ANT HEIGHT].
8. Spin the scrollwheel to select appropriate radar antenna height (above the water-
7. Click [1 STC ANT HEIGHT].
8. Spin the scrollwheel to select appropriate radar antenna height (above the water-
line) then push the left button.
9. If necessary, select [2 LOW LEVEL ECHO] to reject low level echoes. The setting
range is 0-8. The higher the figure, the stronger the low level echo that is erased.
10. To save the custom settings, select [SAVE] from [0 DEFAULT].
2.13.3
How to restore a user customized echo to the saved settings
If you get lost in operation while adjusting the settings for a user customized echo, you
can easily restore the settings for that user customized echo saved at
paragraph 2.13.2).
can easily restore the settings for that user customized echo saved at
paragraph 2.13.2).
1. Right-click the [Customize Echo] button on the Status bar then click [Customize
Echo Menu].
2. Click [0 DEFAULT].
3. Select [USER].
3. Select [USER].
2.13.4
How to restore a user customized echo to the factory default
settings
settings
You can erase a customized echo options to restore its factory default options (see
the tables on pages 2-12 and 2-13).
the tables on pages 2-12 and 2-13).
1. Click the [Customize Echo] button on the Status bar to select [CUSTOM1] or
[CUSTOM2] for which you want to restore its factory default settings.
2. Right-click the [Customize Echo] button on the Status bar then click [Customize
Echo Menu].
3. Click [0 DEFAULT].
4. Select [FACTORY].
4. Select [FACTORY].
CONTRAST
C
B
A
CONTRAST
3
2 1
4