Furuno FAR/FR-2815/2825 Manual De Usuario

1) Unfasten the three M10 bolts at the front of

the display unit and separate the mounting base
from the display unit.

2) Drill five holes of 12mm diameter in the table-

top.

3) Secure the mounting base to the tabletop by

using M10 nuts, bolts and flat washers.

4) Place the display unit on the mounting base

and fasten it to the mounting base with the bolts
removed in step 1.

Fix the pedestal to the mounting location with M12
nuts, bolts and washers. (The cable gland is at the
bottom of the pedestal.) See the outline drawing at
the back of this manual.

The separate type control panel connects to the dis-
play unit with a connection cable. Nonslip rubber
feet (supplied) can be attached to the bottom of
the control panel. The panel can be permanently
fixed to a tabletop with the control panel fixing
plate kit (option).

560

644

460

529.5

70

   

42