Furuno 2827W Manual De Usuario
1. MOUNTING
1-22
1.5 Transceiver
Unit
The transceiver unit is designed for bulkhead mounting, and may be mounted in any dry,
well-ventilated place. Ensure the mounting location is strong enough to support the weight
of the unit under the continued shock and vibration normally encountered onboard. The
transceiver must not be installed in close proximity of a magnetic compass; observe the
compass safe distances.
Fix the unit to bulkhead with bolts (RTR-081A: M6, 4 pcs., RTR-082: M8, 6 pcs.). Run a
ground wire (8 mm
well-ventilated place. Ensure the mounting location is strong enough to support the weight
of the unit under the continued shock and vibration normally encountered onboard. The
transceiver must not be installed in close proximity of a magnetic compass; observe the
compass safe distances.
Fix the unit to bulkhead with bolts (RTR-081A: M6, 4 pcs., RTR-082: M8, 6 pcs.). Run a
ground wire (8 mm
2
) between the ship’s body and the transceiver unit, using the lug
supplied to make the connection at the earth stud on the transceiver unit. Keep the length of
the ground wire as short as possible.
the ground wire as short as possible.
198
70
(38)
4-
φ
8
320
250
±
1
(25)
353
380
±
1
26
12
100
149
157
404
150
Transceiver unit RTR-081A (for FAR-2827W)
420+2
427+1
15
15
6- 10
457
192
88
Transceiver unit RTR-082 (for FAR-2837SW)