Furuno FCR-2807 Manual De Usuario
10. How to Plan Routes
10-16
10.6 Backup
How to back up routes to a floppy disk
Routes can be saved to a floppy disk for backup, use by other planning stations or navigation stations. For details,
see "How to back up a file to a floppy disk" in section 14.3.
see "How to back up a file to a floppy disk" in section 14.3.
How to restore a file from a floppy disk
If you lose route planning data, you can easily restore it if you have backed it up with a floppy disk. Other planning
stations and navigation stations may also use route planning data stored on a floppy disk. For further details, see
"How to read a file from a floppy " in section 14.3.
stations and navigation stations may also use route planning data stored on a floppy disk. For further details, see
"How to read a file from a floppy " in section 14.3.
10.7 WPT Table Report
This report is generated when you choose Report from the Plan Route menu. To display the report viewer, choose
Route-Plan from the sidebar, put the cursor on the triangle in the Plan Route dialog box, choose Report then push
the scrollwheel. To close the report viewer, click X in the right corner of the report viewer. The report may be
printed by clicking the Print Text button.
Route-Plan from the sidebar, put the cursor on the triangle in the Plan Route dialog box, choose Report then push
the scrollwheel. To close the report viewer, click X in the right corner of the report viewer. The report may be
printed by clicking the Print Text button.
WPT report consists information of:
- Position of waypoints
- Planned speeds
- Estimated times of arrival (ETA)
- Planned courses
- Planned fuel consumption
- Distances between waypoints. Distance is not directly
calculated from LAT and LON values of WPTs location,
but the distance is shorter distance compensated for
planned radius for each waypoint.
calculated from LAT and LON values of WPTs location,
but the distance is shorter distance compensated for
planned radius for each waypoint.
-Total distance of route. Distance is not directly
calculated from LAT and LON values of WPTs location,
but the distance is shorter distance compensated for
planned radius for each waypoint.
calculated from LAT and LON values of WPTs location,
but the distance is shorter distance compensated for
planned radius for each waypoint.