Furuno FCR-2807 Manual De Usuario

1. How to Monitor Routes 

The following alerts are related to route monitoring. 

352 Route: Illegal ETA WPT: Appears when the system cannot use the chosen ETA waypoint. The reason might 
be corrupted or missing route file. 

353 Route: Illegal To WPT: Appears when the system cannot use the chosen "To WPT". The reason might be 
corrupted or missing route file. 

354 Route: Illegal final WPT: Appears when the system cannot use the chosen final waypoint. The reason might 
be corrupted or missing route file. 

360 Route: WPT change disabled: Appears when you try to change next or final waypoint while the system is in 
automatic route steering. Leave automatic route steering and change the waypoint. 

363 Route: Choose disabled: Appears when the you try to choose a new route for route monitoring while the 
system is in automatic route steering. Leave automatic route steering and choose a new route. 

364 Route: Cancel disabled: Appears when you try to cancel current monitored route while the system is in 
automatic route steering. Leave automatic route steering and cancel the current route. 

454 Route: End reached: Appears when own ship passes the last waypoint. The system cancels current route 
monitoring. Normally this alert only appears if alert 458 is left unacknowledged. 

457 Route: Outside chl limits: Appears if own ship is outside the monitored channel. 

 

The following alerts are related to route monitoring when automatic route steering is not used: 

451 Route: WPT approach alert: Appears when own ship is "x" minutes of the wheel over point of the next 
waypoint, "x" being the time specified. 

458 Route: Last WPT approach: Appears when own ship arrives "x" minutes from the last waypoint, "x" being 
the time specified. Acknowledgement of this alert cancels current route monitoring.