Furuno FCR-2107-D Manual De Usuario
1. Operational Overview
1-16
1.12 Alerts
Description
When error is detected, the appropriate alert indication appears (in red or yellow) and the audio alert sounds. Silence
the audio alert with the ALARM ACK key or select the ALARM ACK box then push the left button. The error
indication remains on the display until the reason for the alert is removed.
the audio alert with the ALARM ACK key or select the ALARM ACK box then push the left button. The error
indication remains on the display until the reason for the alert is removed.
Alerts description
Message no.
Message
Alert category
Description
100
RadOv No Headline
Warning
No heading signal
101
RadOv No Azimuth
Warning
No antenna rotation signal
102
RadOv No Trigger
Warning
No trigger signal
103
RadOv No Video
Warning
No video signal
108 Watch
Alarm
Warning
Watch 0:00 (Watch appears and time count freezes
at 0:00).
at 0:00).
705 Gyro
Error
Warning
Gyro
data is not received correctly.
708 Log
Error
Warning
Log
data is not received correctly.
709
Dual-Axis Log (BT) Error
Warning
Dual axis log data is not received correctly.
710
Echo Sounder Error
Warning
Echo sounder data is not received correctly.
711
Wind Sensor Error
Warning
Wind sensor data is not received correctly.
712
Position Eq Error
Warning
Position equipment data is not received correctly.
738 Datum
mismatch
Warning
Position sensor outputs position another datum as
set in Installation parameters.
set in Installation parameters.
764
LAN fail for LAN-adapter
Warning
Unexpected LAN error. Maybe LAN cable or
HUB broken/disconnected.
HUB broken/disconnected.
771
LAN fail for Radar
Warning
Unexpected LAN error. Maybe LAN cable
broken/disconnected.
broken/disconnected.
860
Safety Contour
Alarm
Depth is less than the safety contour.
874
Anchor Watch
Warning
Ship has drifted more than a threshold value.
Refer to section 4.15 TT Alerts for TT alerts, section 5.17 AIS Alerts for AIS alerts.
How to output alarm signals
Four ports are provided to output alarm signals to external equipment. Select the port and alarm signals to contact
output. For more information, see the installation manual.
output. For more information, see the installation manual.