Furuno FAR-3310 Manual De Usuario
2. RADAR, CHART RADAR OPERATION
2-45
2.30
Dual Radar (B-type only)
When installing two FAR-3xx0 series radars, the image from both radars (main radar
and external radar) may be shown together on one radar display. This allows you to
take advantage of the best characteristics each type of radar has to offer. The dual
radar function is available only for the B type.
and external radar) may be shown together on one radar display. This allows you to
take advantage of the best characteristics each type of radar has to offer. The dual
radar function is available only for the B type.
Example image of dual radar
The following should be done from the [RADAR INSTALLATION] menu at the time of
installation in order to enable the dual radar display:
installation in order to enable the dual radar display:
• Set the display area on both the main radar and the external radar ([2 COMBINE
SECTOR], [3 COMBINE RANGE]).
• Select the number of external radar to use ([4 EXT RADAR]).
• Turn the dual radar function on ([5 COMBINE FUNC] is set to [ON]).
• Turn the dual radar function on ([5 COMBINE FUNC] is set to [ON]).
TT information
When a TT target crosses over the boundary line of the display area, its information is
passed to the other radar display. Tracking on the TT continues. The number of the
antenna which acquires a TT target is displayed in front of the TT number.
passed to the other radar display. Tracking on the TT continues. The number of the
antenna which acquires a TT target is displayed in front of the TT number.
Image from main radar
Image from external radar
TT
TT
Boundary lines of display area
TT information is passed to the
other radar display. Tracking on
the TT continues.
other radar display. Tracking on
the TT continues.
TT target crosses over the
boundary line of the display area.
boundary line of the display area.