Furuno FAR-3310 Manual De Usuario
3. TARGET TRACKING (TT)
3-5
How to sleep, deactivate an acquisition zone
Use the trackball to select the appropriate AZ box. Sleep or deactivate the acquisition
zone as appropriate:
Sleep acquisition zone: Push the left button momentarily to remove the acquisition
zone from the screen. The indication in the AZ box changes from [WORK] to [SLEEP].
To reactivate and display the acquisition zone, repeat this procedure to display
[WORK].
Deactivate acquisition zone: Click applicable AZ box and select [OFF].
zone as appropriate:
Sleep acquisition zone: Push the left button momentarily to remove the acquisition
zone from the screen. The indication in the AZ box changes from [WORK] to [SLEEP].
To reactivate and display the acquisition zone, repeat this procedure to display
[WORK].
Deactivate acquisition zone: Click applicable AZ box and select [OFF].
How to acknowledge the acquisition zone audio alarm
Press the ALARM ACK key, or click the [Alert] box.
Acquisition zone stabilization
The acquisition zone may be referenced to heading or North. Open the menu then se-
lect the [TT•AIS] and [1 ACQUISITION ZONE] menus. Set [1 AZ STAB] to [STAB
HDG] or [STAB NORTH] as appropriate. For a polygon acquisition zone, stabilization
can be selected to [2 AZ POLYGON].
lect the [TT•AIS] and [1 ACQUISITION ZONE] menus. Set [1 AZ STAB] to [STAB
HDG] or [STAB NORTH] as appropriate. For a polygon acquisition zone, stabilization
can be selected to [2 AZ POLYGON].
3.5
Manual Acquisition
This radar can manually acquire and track a maximum of 200 targets. The maximum
number of acquired targets ([NUMBER OF TT]) is set at the time of installation. The
options are 200 ([MAX]) and 100.
number of acquired targets ([NUMBER OF TT]) is set at the time of installation. The
options are 200 ([MAX]) and 100.
The number of automatically and manually acquired targets is determined by the set-
ting of [TT SELECT] in the [TT] menu.
ting of [TT SELECT] in the [TT] menu.
Note: When connecting with the FAR-2xx7 series radar, the maximum number of ac-
quired targets ([NUMBER OF TT]) should be set to 100 in the [RADAR INSTALLA-
TION] menu. For details, see the installation manual.
quired targets ([NUMBER OF TT]) should be set to 100 in the [RADAR INSTALLA-
TION] menu. For details, see the installation manual.
3.5.1
How to set manual acquisition conditions
1. Right-click the TT mode indication then select [TT Menu] to show the [TT] menu.
2. Select [1 TT SELECT] and the acquisition condition.
2. Select [1 TT SELECT] and the acquisition condition.
3. Close the menu.
[NUMBER OF TT] is [MAX]
[NUMBER OF TT] is [100]
Menu setting
Acquisition condition
Menu setting
Acquisition condition
[MANUAL 200] 200 targets manually,
Not available for auto acquisi-
tion
tion
[MANUAL 100] 100 targets manually,
Not available for auto acquisi-
tion
tion
[AUTO 50]
50 targets automatically,
150 targets manually
150 targets manually
[AUTO 25]
25 targets automatically,
75 targets manually
75 targets manually
[AUTO 100]
100 targets automatically,
100 targets manually
100 targets manually
[AUTO 50]
50 targets automatically,
50 targets manually
50 targets manually
[AUTO 150]
150 targets automatically,
50 targets manually
50 targets manually
[AUTO 75]
75 targets automatically,
25 targets manually
25 targets manually
[AUTO 200]
200 targets automatically, Not
available for manual acquisition
available for manual acquisition
[AUTO 100]
100 targets automatically, Not
available for manual acquisition
available for manual acquisition