Furuno FAR-3310 Manual De Usuario
6. CHART OVERVIEW
6-31
Check position sensors ([POSN] page)
Open the menu and click the [POSN] tab in the [System Sensor Settings] page or [Lo-
cal Sensor Settings] page of the [Sensor] menu. The [Prim] and [Second] labels indi-
cate the type of the position sensor. (In the figure below the [Prim] label shows GPS1.)
[Prim] and [Second] indicate sensor status and priority.
cal Sensor Settings] page of the [Sensor] menu. The [Prim] and [Second] labels indi-
cate the type of the position sensor. (In the figure below the [Prim] label shows GPS1.)
[Prim] and [Second] indicate sensor status and priority.
Only one sensor can be primary while the others can be secondary or off position. Af-
ter a sensor is turned off, its status is changed to Secondary state. When a position
sensor state is changed to primary and another sensor was primary, the sensor for-
merly primary becomes secondary.
ter a sensor is turned off, its status is changed to Secondary state. When a position
sensor state is changed to primary and another sensor was primary, the sensor for-
merly primary becomes secondary.
Select the "Primary" navigation sensor as the sensor that is considered to be most ac-
curate and reliable. Set all other navigation sensors as "Secondary".
curate and reliable. Set all other navigation sensors as "Secondary".
6.16.5
How to reset odometer and trip meter
To reset the odometer and/or trip meter do as follows:
1. Open the menu and select the [Voyage] menu from the [NAVI Log] menu in the
[Record] menu.
2. Click one of the following buttons.
[Reset All]: Reset both the odometer and the trip meter.
[Reset Trip]: Reset the trip distance.
[Reset Trip]: Reset the trip distance.
3. Click the [Close] button to finish.
Passed
LAT:
LON:
LON:
Not Available
LAT:
LON:
LON:
Second shows Integrity as
“Not Available” when only one
position-fixing equipment is
connected.