Furuno FAR-3310 Manual De Usuario

1.  OPERATIONAL OVERVIEW

2. Click [Day], [Dusk] or [Night] as appropriate. For example, select [Day] to show its 

options.

3. Click the palette (gray, blue) desired.

Note: A palette can also be selected by pushing the BRILL control on the Control Unit.

The brilliance setting is defined according to the color palette setting (see section 1.3). 
However, manual adjustment of the brilliance is also possible.

Note 1: The brilliance of the FURUNO monitor can only be adjusted from the Control 
Unit. Use a serial cable for brilliance adjustment to make the connection between the 
Processor Unit and the Control Unit.

Note 2: Improper brilliance may affect the visibility of information, especially on the 
night display.

Operate the BRILL control to adjust brilliance. Turn it clockwise to increase the bril-
liance; counterclockwise to decrease the brilliance. Watch the brilliance level indica-
tion on the [BRILL] button (see the illustration below) to see the current brilliance level.

1. Push the InstantAccess knob.
2. Rotate the knob to select the [BRILL] button then push the knob to show the bril-

liance adjustment window.

3. Push the knob, rotate the knob to set the brilliance then push the knob to confirm 

the setting. The calibration state indication changes to "UNCALIB". 

4. To restore the default setting, rotate the knob to select the [CALIB] button then 

push the knob. The calibration state indication changes to "CALIB".

86

Current brilliance level

[CALIB] 
button

[BRILL] 
button

Calibration state
CALIB: Default setting
UNCALIB: Manual setting