Planar VS17.4SXAD Manual De Usuario
10 | Installing the Display
VS17.4SXAD / CM17.4SXAD
(
020-0168-00B
)
Power Management System
The VitalScreen CSR and VitalScreen CR displays comply with the
VESA Display Power Management Signaling (DPMS) standard. This
standard provides four power-saving modes, based on the display
detecting the horizontal or vertical sync signals. This table describes
the four modes.
VESA Display Power Management Signaling (DPMS) standard. This
standard provides four power-saving modes, based on the display
detecting the horizontal or vertical sync signals. This table describes
the four modes.
Mode AC
Input
Power
1
LED
Status
On
60 watts maximum
Steady green
Standby
5 watts maximum
Blinking green
Suspend
5 watts maximum
Blinking green
Off
5 watts maximum
Off
1
Including AC adapter
When the display is in power-saving mode or detects incorrect timing,
the screen is blank and the power LED indicator blinks.
the screen is blank and the power LED indicator blinks.
Landscape-to-Portrait Mechanical Conversion
The 17.4" display (deskstand version) has a unique feature that allows
a mechanical conversion of the display from the traditional landscape
mode to a vertical portrait mode.
a mechanical conversion of the display from the traditional landscape
mode to a vertical portrait mode.
Use both hands whenever you are changing the orientation of
the display.
1
Gently pull the lower half of the display toward you.
You must tilt the display upward before rotating it.
2
Rotate the display 90 degrees to left (counterclockwise) until it stops
in portrait mode.
in portrait mode.
3
Select, if necessary and/or available, the different option on the video
card, or display settings on the control panel.
card, or display settings on the control panel.
4
Refer to
www.portrait.com
for software that allows conversion from
landscape to portrait mode.