Topcon GPT-2000 Manual De Usuario
16 SELECTING MODE
16-3
*LANGUAGE selection is different in different countries.
16.2 How to Set Selecting Mode
<Example> : Setting unit in hPa, °F, NEZ MEMORY:ON
ACK MODE
STANDARD /
OMITTED
Set the procedure of the communication with
external device.
STANDARD:Normal procedure
OMITTED:Even though the [ACK] is omitted
from the external device, the data is
not sent again.
not sent again.
GRID
FACTOR
USE G.F. /
DON’T USE
DON’T USE
Select using GRID FACTOR in calculation of
measurement data.
CUT & FILL
STANDARD /
CUT&FILL
CUT&FILL
In the layout mode, CUT & FILL can be
displayed instead of dZ.
ECHO BACK
ON / OFF
It is possible to output the data of echo back
type.
CONTRAST
MENU
ON / OFF
When the instrument is turned ON, it is possible
to display the screen which you can adjust
contrast of the display and confirm the prism
constant (PSM) and atmospheric correction
value (PPM).
contrast of the display and confirm the prism
constant (PSM) and atmospheric correction
value (PPM).
Operating procedure
Operation
Display
1
While pressing [F2] key, turn power ON.
[F2]
+
Power ON
2
Press [F1](UNIT SET ) key.
[F1]
3
Press [F1](TEMP. & PRES.) key.
[F1]
4
Press [F2](°F) key, and press
[F4](ENTER) key.
[F4](ENTER) key.
[F2]
[F4]
[F4]
5
Press [F1](hPa) key, and press [F4] (ENTER) key.
Returns to unit set menu.
Returns to unit set menu.
[F1]
[F4]
[F4]
6
Press [ESC] key.
Returns to PARAMETERS 2 menu.
Returns to PARAMETERS 2 menu.
[ESC]
PARAMETERS 2
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE P
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE P
↓
TEMP. & PRES. UNIT
TEMP. = °C
PRES. = mmHg
°C °F ––– ENTER
TEMP. = °C
PRES. = mmHg
°C °F ––– ENTER
TEMP. & PRES. UNIT
TEMP. = °F
PRES. = mmHg
hPa mmHg inHg ENTER
TEMP. = °F
PRES. = mmHg
hPa mmHg inHg ENTER
UNIT SET 1/2
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE
F1:TEMP. & PRES.
F2:ANGLE
F3:DISTANCE
PARAMETERS 2
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET
F1:UNIT SET
F2:MODE SET
F3:OTHERS SET