Topcon GPT-2000 Manual De Usuario

4-4

   4 DISTANCE MEASUREMENT

●

It is possible to change the unit for distance measurement mode by soft key.
This setting is not memorized after power off. Refer to 16 “SELECTING MODE” to set at the initial 

setting (memorized after power off).

This setting is not memorized after power is off. Refer to Chapter 16”SELECTING MODE” to set at the 
initial setting (memorized after power is off).
•Fine Mode

: This is a normal distance measuring mode.

The unit to be displayed: 0.2mm or 1mm. (0.001ft or 0.005ft)
Measurement time

0.2mm mode: approx. 3.0 sec.
1mm mode: approx. 1.2 sec.

•Tracking Mode : This mode measures in shorter time than in fine mode.

It is very useful when tailing the moving object or carrying out stake-out work.
The unit to be displayed: 10mm
Measuring time: approx. 0.3 sec.

•Coarse Mode

: This mode measures in shorter time than in fine mode.

The unit to be displayed: 10mm or 1mm
Measuring time: approx. 0.5 sec.

Press the [F4](P1

↓

) key  twice to get the function 

on page 3.

[F4]

Every time pressing the [F2](m/f/i) key, the display 
unit will be changed.

●

Every time pressing the [F2](m/f/i) key, the unit 
mode switches.

[F2]

Press the [F2](MODE) key from the distance 
measuring mode.*1)

The initial character (F/T/C) of set mode is 
displayed . (F:Fine, T:Tracking, C:Coarse)

[F2]

Press the [F1](FINE) key, [F2](TRACK) key, or 
[F3](COARSE) key.

[F1]~[F3]

*1) To cancel the setting, press the  [ESC] key.

↓

↓

↓

↓

↓

↓