Topcon GPT-2000 Manual De Usuario

7-8

   7 DATA COLLECTION

While executing the DATA COLLECT mode, you can search the recorded data.

While executing the DATA COLLECT mode, you can enter PCODE /ID from PCODE Library.

*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.
*2) PCODE can be input by inputting a register number linked with PCODE Library.

To show the list of PCODE library, press the [F2](SRCH) key.

*3) Data collect sequence can be set to [EDIT

→

MEAS]. See to Section 7.6 “Setting Parameter of Data 

*4) The mark "*" indicates the previous measuring mode.
*5) You can confirm the measured data as follows.  Refer to Section 7.6 “Setting Parameter of Data Collect 

While executing the DATA COLLECT mode,  press 
[F2](SRCH) key. *1)

The using file name will appear on the top of the 
right side of the display.

[F2]

Select one of three search methods by pressing 
[F1] to [F3] key. *2)

[F1] to [F3]

*1) It is possible to see the PCODE list when the arrow is located beside PCODE or ID.
*2) The operation is same as the "SEARCH" in the MEMORY MANAGER mode.

For more information, refer to Section 9.2 “Searching Data”.

Move the arrow to the PCODE or ID in the DATA 
COLLECT mode,  press the [F1](INPUT) key.

[F1]

Enter a register number linked with PCODE library 
and press the [F4](ENT) key.
(Example)
Register number, 32 = TOPCON

Enter No

[F4]

  

  

→

  

  

→

  

  

→