Garmin G1000H Manual De Usuario

190-01255-00  Rev. B

116

When another auxiliary window is turned on, the DME Tuning Window is replaced on the PFD.

When turning on the system for use, the system remembers the last frequency used for DME tuning 

and the NAV1

NAV2,

or

HOLD

state prior to shutdown.

The system tunes the optional DME transceiver. The UHF DME frequency is tuned by pairing with a VHF

NAV frequency. DME frequency pairing is automatic and only the VHF NAV frequency is shown.

The DME Tuning Window is located to the right of the HSI in the lower right corner of the PFD. The DME

transceiver  is  tuned  by  selecting  NAV1,  NAV2,  or  HOLD  in  the  DME  Tuning  Window.    Pressing  the  DME 
Softkey switches the DME Tuning Window on and off.

The following DME transceiver pairings can be selected:

• NAV1 – Pairs the DME frequency from the selected NAV1 frequency.

• NAV2 – Pairs the DME frequency from the selected NAV2 frequency.

• HOLD  –  When  in  the  HOLD  position,  the  DME  frequency  remains  paired  with  the  last  selected  NAV

frequency.

Press the DME Softkey to display the DME Tuning Window.

Turn the small FMS Knob to select the DME tuning mode.

Press the ENT Key to complete the selection.

Pressing the CLR Key or FMS Knob while in the process of DME pairing cancels the tuning entry and reverts

back to the previously selected DME tuning state. Pressing the FMS Knob activates/deactivates the cursor in 
the DME Tuning Window.

See the Flight Instruments Section for displaying the DME information window.