Garmin G1000H Manual De Usuario
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
233
FLIGHT MANAGEMENT
4)
Press the ENT Key. Vertical guidance begins to the altitude constraint for the selected waypoint.
5)
Press the FMS Knob to remove the flashing cursor.
The vertical navigation profile can be modified by directly entering a vertical speed target (VS TGT) and/or flight
path angle (FPA) in the CURRENT VNV PROFILE box.
Modifying the VS TGT and FPA:
1)
Press the FPL Key to display the Active Flight Plan Page on the MFD.
2)
Press the VNV PROF Softkey; or press the MENU Key, highlight ‘Select VNV Profile Window’, and press the ENT
Key. The cursor is now located in the CURRENT VNV PROFILE box.
Key. The cursor is now located in the CURRENT VNV PROFILE box.
3)
Turn the FMS Knobs as needed to edit the values.
4)
Press the FMS Knob to remove the flashing cursor.
ALTITUDE CONSTRAINTS
The system can use altitude constraints associated with lateral waypoints to give guidance for vertical
navigation. These altitudes are, depending on the specific instance, manually entered or retrieved from the
published altitudes in the navigation database. The navigation database only contains altitudes for procedures
that call for “Cross at” altitudes. If the procedure states “Expect to cross at,” then the altitude is not in the
database. In this case the altitude may be entered manually.
published altitudes in the navigation database. The navigation database only contains altitudes for procedures
that call for “Cross at” altitudes. If the procedure states “Expect to cross at,” then the altitude is not in the
database. In this case the altitude may be entered manually.
Large Light Blue Text
Small White Text with
Altitude Restriction Bar
Large White Text
Small Light Blue
Subdued Text
Small Light Blue Text
Figure 5-91 Waypoint Altitude Constraints
Cross AT
or ABOVE
5,000 ft
Cross AT
or BELOW
3,000 ft
Cross AT
2,300 ft
Altitude Constraint
Examples
Displayed Text
Examples