Garmin G1000H Manual De Usuario
![Garmin](https://files.manualsbrain.com/attachments/994f895c1fe9ba298f5fc917e3283ea0d22ac77e/common/fit/150/50/527c517f51a09dedc2e7b1a673b0cf7834e289874ec6cfcd6322d2baf6d7/brand_logo.png)
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B
354
HAZARD AVOIDANCE
The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling
display of traffic. The setup menu also controls the map range settings above which traffic data (symbols
and labels) are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. Maps besides the Traffic Map Page use settings based on those selected for the
Navigation Map Page.
and labels) are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map. Maps besides the Traffic Map Page use settings based on those selected for the
Navigation Map Page.
TRAFFIC MAP PAGE
The Traffic Map Page is specialized to show surrounding TIS traffic data in relation to the aircraft’s current
position and altitude, without clutter from the basemap. It is the principal map page for viewing TIS information.
Aircraft orientation on this map is always heading up unless there is no valid heading. Map range is adjustable
with the RANGE Knob from 2 to 12 nm, as indicated by the map range rings.
Aircraft orientation on this map is always heading up unless there is no valid heading. Map range is adjustable
with the RANGE Knob from 2 to 12 nm, as indicated by the map range rings.
The traffic mode is annunciated in the upper left corner of the Traffic Map Page. When the aircraft is on the
ground, TIS automatically enters Standby Mode. Once the aircraft is airborne, TIS switches from Standby to
Operating Mode and the G1000H begins to display traffic information. Refer to the System Status discussion
for more information.
Operating Mode and the G1000H begins to display traffic information. Refer to the System Status discussion
for more information.
Displaying traffic on the Traffic Map Page:
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Traffic Map Page.
3)
Confirm TIS is in Operating Mode:
Select the OPERATE Softkey to begin displaying traffic.
Or
:
a)
Press the MENU Key.
b)
Select ‘Operate Mode’ (shown if TIS is in Standby Mode) and press the ENT Key.
Display
of System
Status
Figure 6-88 Traffic Map Page
Traffic Advisory,
300’ Above,
Descending
Non-Threat
Traffic, 5000’
Above,
Climbing
Traffic Advisory,
Off Scale Aircraft
is Out of Range,
1000’ Above and
Climbing
Non-Bearing Traffic (System is
Unable to Determine Bearing),
Aircraft Distance is 7.0 nm,
500’ Above and Descending
Operating
Mode
Mutes “TIS Not
Available” Voice
Alert
Non-Threat
Traffic,
Non-Altitude
Reporting
“TIS Not
Available” Voice
Alert Mute
Status