Garmin G1000H Manual De Usuario

190-01255-00  Rev. B

485

When a new message is issued, the 

 Softkey will flash to alert the flight crew of a new message.  It 

will continue to flash until acknowledged by pressing the softkey.  Active messages are displayed in white 
text.  Messages that have become inactive will change to gray text.  The 

 Softkey will flash if the state of 

a displayed message changes or a new message is displayed.  The inactive messages can be removed from the 
Message Window by pressing the flashing 

 Softkey.

The G1000H System Messages conveys messages to the flight crew regarding problems with the G1000H 

system.  Typically, a large red “X” appears in a window when a related LRU fails or detects invalid data.

When an LRU or an LRU function fails, a large red “X” is typically displayed on windows associated with the 

failed data.  The following section describes various system annunciations.  Refer to the RFM for additional 
information regarding pilot responses to these annunciations.

Upon power-up of the G1000H system, certain windows remain invalid as G1000H equipment begins 

to initialize.  All windows should be operational within one minute of power-up.  Should any window 
continue to remain flagged, the G1000H system should be serviced by a Garmin-authorized repair facility.