Garmin G1000H Manual De Usuario

190-01255-00  Rev. B

499

MAG VAR WARN – Large magnetic 
variance.  Verify all course angles. 

The GDU’s internal model cannot determine the exact magnetic variance for geographic 
locations near the magnetic poles.  Displayed magnetic course angles may differ from 
the actual magnetic heading by more than 2°.

SVS – SVS DISABLED: Out of 
available terrain region.

Synthetic Vision is disabled because the aircraft is not within the boundaries of the 
installed terrain database.

SVS – SVS DISABLED: Terrain DB 
resolution too low.

Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arc-
second or better) is not currently installed.

SCHEDULER [#] – <message>.

Message criteria entered by the user.

CHECK CRS – Database course for 
LOC1 / [LOC ID] is [CRS]°.

Selected course for LOC1 differs from published localizer course by more than 10 
degrees.

CHECK CRS – Database course for 
LOC2 / [LOC ID] is [CRS]°.

Selected course for LOC2 differs from published localizer course by more than 10 
degrees.

[PFD1, PFD2, or MFD1] CARD 
1 REM – Card 1 was removed.  
Reinsert card.

The SD card was removed from the top card slot of the specified PFD or MFD.  The SD 
card needs to be reinserted.

[PFD1, PFD2, or MFD1] CARD 
2 REM – Card 2 was removed.  
Reinsert card.

The SD card was removed from the bottom card slot of the specified PFD or MFD.  The 
SD card needs to be reinserted.

[PFD1, PFD2, or MFD1] CARD 1 
ERR – Card 1 is invalid.

The SD card in the top card slot of the specified PFD or MFD contains invalid data.

[PFD1, PFD2, or MFD1] CARD 2 
ERR – Card 2 is invalid.

The SD card in the bottom card slot of the specified PFD or MFD contains invalid data.

HDG PRESET MODE – Magnetic 
anomoly detected.  HPM is available.

The magnetometer has detected a magnetic anomoly that could affect heading 
indications.  Heading Preset Mode may be used.

In some circumstances, some messages may appear in conjunction with others.

‘Flight plan successfully imported.’

A flight plan file stored on the SD card was successfully imported as a stored flight plan.

‘File contained user waypoints only.  User waypoints 
imported successfully.  No stored flight plan data 
was modified.’

The file stored on the SD card did not contain a flight plan, only user waypoints.  These waypoints 
have been saved to the system user waypoints.  No flight plans stored in the system have been 
modified.

‘No flight plan files found to import.’

The SD card contains no flight plan data.

‘Flight plan import failed.’

Flight plan data was not successfully imported from the SD card.

‘Flight plan partially imported.’

Some flight plan waypoints were successfully imported from the SD card, however others had errors 
and were not imported.  A partial stored flight plan now exists in the system.

‘File contained user waypoints only.’

The file stored on the SD card did not contain a flight plan, only user waypoints.  One or more of 
these waypoints did not import successfully.

‘Too many points.  Flight plan truncated.’

The flight plan on the SD card contains more waypoints than the system can support.  The flight plan 
was imported with as many waypoints as possible.