Vertex Standard VX-8R Manual De Usuario
VX-8R O
PERATING
M
ANUAL
157
S
ET
M
ODE
I
TEM
91: SPEC-ANALYZER
Function: Selects the Spectrum Analyzer sweep mode.
Available Values: 1Time / CONTINUOUS / Full Time
Default: 1time
1Time:
Available Values: 1Time / CONTINUOUS / Full Time
Default: 1time
1Time:
The receiver sweeps the current band once.
CONTINUOUS: The receiver sweeps the current band repeatedly until the Spectrum Ana-
lyzer is turned off.
Full Time:
This mode is activated similar to a “Continuous” mode. However, the
transceiver outputs audio on the center frequency (T) through the speaker
when Spectrum Analyzer is activated.
transceiver outputs audio on the center frequency (T) through the speaker
when Spectrum Analyzer is activated.
S
ET
M
ODE
I
TEM
92: SQL LEVEL
Function: Sets the Squelch threshold level.
Available Values: LEVEL 0 ~ LEVEL 15 (AM and Narrow FM), LEVEL 0 ~ LEVEL 15
(Wide FM and AM Broadcast)
Default: LEVEL 1 (AM and Narrow FM), LEVEL 2 (Wide FM and AM Broadcast)
Available Values: LEVEL 0 ~ LEVEL 15 (AM and Narrow FM), LEVEL 0 ~ LEVEL 15
(Wide FM and AM Broadcast)
Default: LEVEL 1 (AM and Narrow FM), LEVEL 2 (Wide FM and AM Broadcast)
S
ET
M
ODE
I
TEM
93: SQL S-METER
Function: Adjusts the Squelch threshold level to the S-meter level.
Available Values: OFF / LEVEL 1 ~ LEVEL 9
Default: OFF
Available Values: OFF / LEVEL 1 ~ LEVEL 9
Default: OFF
S
ET
M
ODE
I
TEM
94: SQL SPLIT
Function: Enables/Disables split CTCSS/DCS coding.
Available Values: OFF / ON
Default: OFF
When this Set Mode Item is set to “ON”, you can see the following additional parameters
after the “MESSAGE” parameter while selecting the Set Mode Item 97: SQL TYPE:
D CD:
Available Values: OFF / ON
Default: OFF
When this Set Mode Item is set to “ON”, you can see the following additional parameters
after the “MESSAGE” parameter while selecting the Set Mode Item 97: SQL TYPE:
D CD:
DCS Encode only (“DC” icon will appear while operating)
TONE-DCS:
Encodes a CTCSS Tone and Decodes a DCS code
(the “T-D” icon will appear during operation)
(the “T-D” icon will appear during operation)
D CD-TONE SQL: Encodes a DCS code and Decodes a CTCSS Tone
(the “D-T” icon will appear during operation)
Select the desired operating mode from the selections shown above.
S
ET
M
ODE
S
ET
M
ODE
S
ELECTION
D
ETAILS