Siemens RL-854 Manual De Usuario
RL-854 Radio Control Unit
Type I, Style A
Type I, Style A
Installation
2001 Siemens Airfield Solutions, Incorporated
96A0027L
Page 17
All rights reserved
Issued 5/01
Interface Panel
(contd.)
Other L-821 Configurations
Multiple configurations for the L-821 are available. For example, CCI
control voltage can be provided from an external source. This eliminates
the need for the CCI output voltage from the CCR. Contact Siemens Airfield
Solutions Sales Department for details.
control voltage can be provided from an external source. This eliminates
the need for the CCI output voltage from the CCR. Contact Siemens Airfield
Solutions Sales Department for details.
WARNING: Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
This section provides instructions for the installation of the RL-854 Radio
Control unit and RL-854PR Radio Control unit with the power relay option.
Refer to the project plans and specifications for the specific installation
instructions.
Control unit and RL-854PR Radio Control unit with the power relay option.
Refer to the project plans and specifications for the specific installation
instructions.
The equipment must be handled carefully to prevent component damage.
Unpack the carton upon receipt and check the contents and their condition.
You should find the antenna, the antenna connector, the radio unit, and the
antenna lead-in cable. Note any exterior damage to the carton that might
lead to detection of equipment damage.
Unpack the carton upon receipt and check the contents and their condition.
You should find the antenna, the antenna connector, the radio unit, and the
antenna lead-in cable. Note any exterior damage to the carton that might
lead to detection of equipment damage.
If you find any damage to equipment, file a claim form with the carrier
immediately. Inspection of equipment by the carrier may be necessary.
immediately. Inspection of equipment by the carrier may be necessary.
Refer to Installing RL-854PR Radio Controller in this section for
RL-854PR installation details.
RL-854PR installation details.
To install the standard RL-854 Radio Control unit, perform the following
procedure:
procedure:
1. Determine the best location for the Radio Control.
NOTE: Radio Control location should be within 50 feet (15.24 m) of
the antenna and secured to a wall. Consideration should be given to
locating it out of a traffic area to reduce or minimize its exposure to
unauthorized personnel. Consideration should also be given to the
routing of the antenna lead-in cable. Route it away from heavy
concentrations of electrical wires to reduce interference.
the antenna and secured to a wall. Consideration should be given to
locating it out of a traffic area to reduce or minimize its exposure to
unauthorized personnel. Consideration should also be given to the
routing of the antenna lead-in cable. Route it away from heavy
concentrations of electrical wires to reduce interference.
2. See Figure 4. Install the radio unit using the four mounting holes.
NOTE: Use four 1/4 x 1 in.- (6.35 x 25.4 mm-) long lag screws with
1/4 in. flat washers (or other suitable fasteners) for mounting, or as
appropriate for the surface to which the radio unit is being mounted.
1/4 in. flat washers (or other suitable fasteners) for mounting, or as
appropriate for the surface to which the radio unit is being mounted.
3. Installation
Unpacking
Installing Standard RL-854