DELL 34XX Manual De Usuario

NOTE: This command retrieves from both RAID controller modules the IOC dump log data and the 
IOC dump metadata. Using a 7zip file format, the retrieved data is archived and compressed into a 
single file with a file name of your choice. The 7zip archive file contains the following:
filename+”IOCLog”+[A|B].gz – the IOC logs retrieved from RAID controller module 0 or RAID 
controller module 1 if available

filename+”IOCLogInfo”+[A|B].txt – the IOC logs metadata info retrieved from RAID controller 
module 0 or RAID controller module 1. If the IOC log data cannot be retrieved from a RAID 
controller module, the IOC log data cannot be retrieved from a RAID controller module, the 
metadata .txt file will contain the error condition and reason.

Following are the error conditions:

The RAID controller module platform and HIC do not support IOC dump.

The RAID controller modules have not collected IOC dump data.

The compressed logs are not in a human-readable format. You must return the logs to Technical 
Support to be evaluated.

Save Physical Disk Log

Description

This command saves the log sense data to a file. Log sense data is maintained by the storage array for 
each physical disk.

Syntax

save allPhysicalDisks logFile="filename"

Parameter

Parameter

Description

logFile

Name of the file to which to write the log sense 

data. You must put quotation marks (" ") around the 

file name.

Save RAID Controller Module NVSRAM

Description

This command saves a copy of the RAID controller module NVSRAM values to a file. This command saves 
all regions.

Syntax

save controller [(0 | 1)] NVSRAM file="filename"

271