Furuno GP-3300 Manual De Usuario
12-9
12.6 Verifying Program Version No.
The procedure which follows shows how to verify the program ver-
sion no. of both the plotter section and the GPS section (GP-3300).
sion no. of both the plotter section and the GPS section (GP-3300).
Plotter section
1. Press the [MENU] key.
2. Press the [8] key select INITIAL SETTINGS.
The plotter program number and its version number appear at the
bottom of the display. The extreme right two digits are the ver-
sion number.
bottom of the display. The extreme right two digits are the ver-
sion number.
8 INITIAL SETTINGS
SELF TEST
: OK
PROGRAM NO.
: 14517020 xx
Program no. of
plotter section
xx : Version number
plotter section
xx : Version number
Figure 12-7 INITIAL SETTINGS menu, showing
location of plotter secttion program number
GPS section (GP-3300)
3. Press [
↑
] to select PAGE CHANGE (TO GPS INITIAL SET-
TINGS).
The GPS section program number and its version number appear
at the bottom of the display. The extreme right two digits are the
version number.
at the bottom of the display. The extreme right two digits are the
version number.
8 INITIAL SETTINGS
: SELECT ITEM
: SELECT PARAMETER
PROGRAM NO. : 48501050 xx
Program no. of
GPS section
xx : Version number
GPS section
xx : Version number
Figure 12-8 GPS INITIAL SETTINGS menu, showing
location of GPS section program number