Furuno tztl15f Manual De Usuario
5. ROUTES
5-3
4. Tap the next route point in the route.
Repeat this step to enter all route points. Each route point is numbered.
5. At the last route point, tap [End Route] at the top right-hand corner of the screen
to complete the route.
6. The window for entering route name appears. Enter route name then tap to con-
firm.
Note: The route created above is called an “inactive route”. When you create a new
route or tap another inactive route, that route becomes a “sleeping route”.
route or tap another inactive route, that route becomes a “sleeping route”.
5.2.3
How to create a route from the points list
1. Open the points list.
2. Tap the point to be the first point in the route then tap [Add to Route]. Repeat to
2. Tap the point to be the first point in the route then tap [Add to Route]. Repeat to
add all required points. The route is drawn on the plotter screen.
3. Tap the Close button to close the points list.
4. Tap any line on the route, tap [Name] on the pop-up menu, and then enter a name
4. Tap any line on the route, tap [Name] on the pop-up menu, and then enter a name
for the route.
5.2.4
How to insert a route point on a route
You can insert a new route point on a route leg as follows.
1. Tap a position on a route leg where to insert a route point.
2. Tap [Insert] on the pop-up menu. The compass symbol marks the position select-
2. Tap [Insert] on the pop-up menu. The compass symbol marks the position select-
ed. The route point is numbered according to its position in the route, and the suc-
ceeding route points are renumbered.
ceeding route points are renumbered.
3. Tap [End Move] at the top right-hand corner of the screen.
Selected point (starting point)
Route point
3
3
4
4
Route leg
2
2
1
1
Inactive route
Sleeping route
3
3
1
1
4
4
2
2
1
1
3
3
2
2