Furuno tztl15f Manual De Usuario
5. ROUTES
5-7
[BTW]: Bearing to waypoint.
[SPEED]: The speed set with [Default Planning Speed] in the [Routes] menu.
[DISTANCE]: Distance between adjacent waypoints.
[TOTAL]: Cumulative distance.
[TTG]: Time to go between adjacent waypoints.
[TOTAL]: Cumulative time in route.
[SPEED]: The speed set with [Default Planning Speed] in the [Routes] menu.
[DISTANCE]: Distance between adjacent waypoints.
[TOTAL]: Cumulative distance.
[TTG]: Time to go between adjacent waypoints.
[TOTAL]: Cumulative time in route.
6. To edit the route, tap the point to process to show the [Edit] menu.
[Start Nav]: Starts navigation of the route from the point selected.
[Find on Chart]: Shows the location of the route on plotter display. The list closes and
the route is put at the center of the plotter display.
[Delete]: Deletes the point selected. The [Edit] screen closes and the [Routes Detail]
screen reappears. The points on the route are renumbered.
[Find on Chart]: Shows the location of the route on plotter display. The list closes and
the route is put at the center of the plotter display.
[Delete]: Deletes the point selected. The [Edit] screen closes and the [Routes Detail]
screen reappears. The points on the route are renumbered.
5.4
How to Find Number of Routes Created
Open the home screen, then tap [Settings] - [General]. Find [Routes] in the [DATA US-
AGE] section. In the example below, 18 routes out of 200 have been created.
AGE] section. In the example below, 18 routes out of 200 have been created.
5.5
How to Find a Route on the Chart
You can easily find the location of a route from the routes list. The selected route is
put at the center of the active plotter display.
put at the center of the active plotter display.
1. Open the home screen, then tap [Lists].
2. Tap [Routes] to open the routes list.
3. Tap a route then tap [Find On Chart] from the options. The menu closes then the
2. Tap [Routes] to open the routes list.
3. Tap a route then tap [Find On Chart] from the options. The menu closes then the
selected route is put at the center of the plotter display.