Furuno tztl15f Manual De Usuario

5.  ROUTES

The color of the XTE line is red for the port side, green for the 
starboard side. You can show or hide these lines and set their 
distance from own ship as follows.

1. Open the home screen, then tap [Settings] - [Routes].
2. Turn [Display XTE Lines] on or off. For [ON], go to the next 

step. For [OFF], tap the close button to finish.

3. Tap [XTE Value] to display the software keyboard 
4. Set the distance of the XTE lines from your ship then tap . 

The XTE alarm sounds (if active) when your ship veers off 
course by the amount set here.

5. Tap the close button to finish.

The waypoint arrival notification feature releases audio and visual notifications when 
your ship reaches a go to point. For the arrival timing, see paragraph 5.9.5. The noti-
fication message "Waypoint Crossing" appears. Activate or deactivate this feature as 
follows.

1. Open the home screen, then tap [Settings] - [Routes].
2. Turn [Waypoint Crossing Notification] on or off.
3. Tap the close button to finish.

The end of route notification feature releases audio and visual notifications when your 
ship reaches the end of a route. For the arrival timing, see paragraph 5.9.5. The noti-
fication message "End of Route" appears. Activate or deactivate this feature as fol-
lows.

1. Open the home screen, then tap [Settings] - [Routes].
2. Turn [End of Route Notification] on or off.
3. Tap the close button to finish.

XTE lines

(Red: port,

 Green: starboard)