Furuno tztl15f Manual De Usuario

6.  RADAR

This section provides the descriptions for the radar menu items not mentioned earlier.

[Antenna Rotation]: Starts or stop antenna rotation. For the serviceman. See the in-
stallation manual.

[Antenna Heading Align]: Compensates for error in positioning of the antenna unit 
at installation. See the installation manual for the adjustment procedure.

[Main Bang Suppression]: Reduces main bang, the clutter appearing at the screen 
center. See the installation manual for the adjustment procedure.

[Enable Sector Blanking]: Sets the area(s) where to prevent transmission. For ex-
ample, set the area where an interfering object at the rear of the antenna would pro-
duce a dead sector (area where no echoes appear) on the display. See the installation 
manual for the procedure.

[Longitudinal (from bow)], [Lateral (-Port]: Set the position of the radar antenna in 
relation to the bow and port.

[Antenna Height]: Set the height of the radar antenna above the waterline.

[Auto Tuning]: Activate or deactivate auto tuning.

[Tuning Source]: Selects the radar range for the adjustment, [Range 1] (long range), 
[Range 2] ((short range).

[Manual Tuning]: Manually tune.

[Radar Monitoring]: Show various voltage levels, and ARPA data. For the service-
man.

[ARPA Advanced Settings]: Sets ARPA parameters. For the installer, serviceman. 
Do not change the settings.

[Set Hardware to Factory Default]: For the serviceman. No use for the user.

[Reset Default Settings]: Restore default settings for items other than those in the 
[RADAR INITIAL SETUP] section.