Furuno tztl15f Manual De Usuario
1. SYSTEM INTRODUCTION
1-27
1.15
Function Gesture
The function gesture controls what occurs when you tap the screen with two fingers.
Select the function as below.
Select the function as below.
1. Open the home screen, then select [Settings] - [General].
2. Tap [Function Gesture].
2. Tap [Function Gesture].
3. Tap a function among the following:
[None]: Nothing happens.
[Screen Capture]: Capture the screen and save it to a micro SD card (or USB
memory). The message shown below appears. Tap [OK] to save the screen cap-
ture. The information following “TZT2SCREENSHOT” is the year, month, day,
hour, minute and second the screenshot was captured.
[Screen Capture]: Capture the screen and save it to a micro SD card (or USB
memory). The message shown below appears. Tap [OK] to save the screen cap-
ture. The information following “TZT2SCREENSHOT” is the year, month, day,
hour, minute and second the screenshot was captured.
[Event]: Record an event. Select a mark from the pop-up menu, and the mark is
put at the position at the time the screen was tapped (see paragraph 4.2.2). The
position, etc. is saved to the points list.
put at the position at the time the screen was tapped (see paragraph 4.2.2). The
position, etc. is saved to the points list.