Furuno tztl15f Manual De Usuario
2. PLOTTER
2-16
2.10.5
Anchor watch alarm
The anchor watch alarm tells you that your ship has moved a distance greater than
the set value when the ship must not be moving.
the set value when the ship must not be moving.
1. Turn on [Anchor Watch Alarm] in the [Alarm] menu.
2. Tap [Anchor Watch Alarm Value] to display the software keyboard.
3. Set the value, then tap .
4. Tap the close button to finish.
2. Tap [Anchor Watch Alarm Value] to display the software keyboard.
3. Set the value, then tap .
4. Tap the close button to finish.
2.10.6
Other Alarm menu items
The followings are the alarm menu items not previously mentioned.
[Hardware Alarm]: This alarm alerts you when something is wrong with the hardware.
[Notification Sound]: Activate or deactivate the notification sound (for "Waypoint
Crossing" (see section 5.8), "End of Route" (section 4.12) or fish finder alarms
(section 7.10)).
Crossing" (see section 5.8), "End of Route" (section 4.12) or fish finder alarms
(section 7.10)).
[Alarm Sound]: Disable or enable the buzzer.
[Sound Alarm Until Acknowledged]: Turn this item on to sound the aural alarm until
an alarm is acknowledged (see paragraph 2.10.7).
an alarm is acknowledged (see paragraph 2.10.7).
[Save Log File]: Save alert list to micro SD card.
[Reset Default Settings]: Select this menu item to restore default settings for the
[Alarm] menu.
[Alarm] menu.
Your ship's position where you
start the anchor watch alarm.
start the anchor watch alarm.
Alarm
setting
setting
: Alarm area