Furuno tztl15f Manual De Usuario

4.  POINTS, EVENT MARKS

You can easily place a point at the center of the plotter display from the points list.

1. Open the home screen, then tap [Lists].
2. Tap [Points] to open the points list.
3. Tap [Name], [Icon], [Color] or [Range] at the top of the list to sort the list.
4. Tap the point to find then tap [Find On Chart].
The menu closes and the selected point is put at the center of the screen on the plotter 
display. If a different mode was in use at the time of point selection

Open the [Layers] menu, then turn [Points] on or off. 

Open the home screen, then tap [Settings] - [Points]. Turn [Display Points Names] on 
or off.

Tap the point (including MOB mark) to go to among the three methods shown below.

•  Select the point on the screen
•  Select a position on the screen
•  Select the point from the points list
After you have selected a point, you can do the following.

•  Restart the cross-track error (XTE) indication.
•  Stop and restart Goto. (Tap the boat icon to display the pop-up menu. Tap [Stop 

Nav] and [Restart Nav] respectively.)

Note: Before you try to go to a point, make sure that the path to the point is clear. Make 
sure to zoom your chart to check for hazards which appear on a smaller scale.