Lowrance electronic X-28 Manual De Usuario
14
sounds. At the same time the alarm sounds,
a message box appears on the screen as
shown at right.
a message box appears on the screen as
shown at right.
Press the up arrow key to silence the alarm.
This will turn the alarm sound off until the
shallow alarm is triggered again.
This will turn the alarm sound off until the
shallow alarm is triggered again.
To turn the alarm off, press a menu key until
the shallow alarm menu appears. Then press
the up arrow key until the word “OFF” ap-
pears.
the shallow alarm menu appears. Then press
the up arrow key until the word “OFF” ap-
pears.
Deep Alarm
The deep alarm adjusts the same as the shallow alarm. Use the “DEEP
ALARM” menu to adjust the deep alarm. When the bottom signal goes
deeper than the setting, an alarm tone sounds.
The deep alarm adjusts the same as the shallow alarm. Use the “DEEP
ALARM” menu to adjust the deep alarm. When the bottom signal goes
deeper than the setting, an alarm tone sounds.
LIGHTS
The X-28’s display is backlighted for night
use. To turn the backlights on or off, press a
menu key repeatedly until the back light menu
appears. Now press the up arrow to turn the
lights on or the down arrow to turn them off.
The menu will clear automatically after a few
seconds.
The X-28’s display is backlighted for night
use. To turn the backlights on or off, press a
menu key repeatedly until the back light menu
appears. Now press the up arrow to turn the
lights on or the down arrow to turn them off.
The menu will clear automatically after a few
seconds.
FEET/METER
The X-28 can show the depth in feet or meters
When the unit is in the metric mode, all depth
readings, ranges, zooms, and alarm settings
are in meters. When a unit is in the feet mode,
all of the above settings are in feet.
The X-28 can show the depth in feet or meters
When the unit is in the metric mode, all depth
readings, ranges, zooms, and alarm settings
are in meters. When a unit is in the feet mode,
all of the above settings are in feet.
To change from feet to meters or vice-versa,
press a menu key until the FEET/METER
menu appears as shown at the bottom of the
previous page. Press the down arrow key to
press a menu key until the FEET/METER
menu appears as shown at the bottom of the
previous page. Press the down arrow key to