Furuno FI-504 Manual De Usuario
2. MAINTENANCE, TROUBLESHOOTING
14
2.2
Troubleshooting
If you feel the equipment is not functioning properly, follow the proce-
dures in the table below to try to restore normal operation. If normal op-
eration cannot be restored, do not attempt to check inside the cabinet.
There are no user-serviceable parts inside.
dures in the table below to try to restore normal operation. If normal op-
eration cannot be restored, do not attempt to check inside the cabinet.
There are no user-serviceable parts inside.
Troubleshooting
Problem
Possible cause
Remedy
Display is
blank. Panel is
not lit.
blank. Panel is
not lit.
• Power supply
• Cabling disconnected or
• Cabling disconnected or
damaged.
• Check power supply.
• Check cabling.
• Check cabling.
Power is on but
no or some
data.
no or some
data.
Sensor is turned off.
Cable from sensor is disconnected
or damaged.
Cable from sensor is disconnected
or damaged.
• Turn on sensor.
• Check cabling.
• Check cabling.
Inaccurate data • Electromagnetic field generating
equipment is in operation.
• Cabling from sensor is damaged.
• Sensor is improperly aligned
(where applicable).
• Turn off all electromagnetic field
generating equipment. Turn them on
and off one by one. Check the dis-
play. Relocate offending equipment
or this instrument as appropriate.
and off one by one. Check the dis-
play. Relocate offending equipment
or this instrument as appropriate.
• Check cabling.
• Check installation. If installation is
proper, an offset may be applied to
certain data. For details, see section
1.7.
certain data. For details, see section
1.7.