Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Pioneer
  4. SC-35
  5. Manual De Usuario

Pioneer SC-35 Manual De Usuario

Descargar
Página de 148
The Advanced MCACC menu
11
111
En
4
Press RETURN to go back to the MCACC Data 
Check menu, repeating steps 2 and 3 to check other 
settings.
5
When you’re finished, press RETURN.
You will return to the Home Menu.
Speaker Setting
Use this to display the speaker size and number of 
speakers. See Speaker Setting on page 115 for more on 
this.
1
Select ‘Speaker Setting’ from the MCACC Data 
Check menu.
2
Select the channel you want to check.
Use 
/ to select the channel. The corresponding 
channel on the layout diagram is highlighted.
Channel Level
Use this to display the level of the various channels. See 
Channel Level on page 116 for more on this.
1
Select ‘Channel Level’ from the MCACC Data 
Check menu.
2
When ‘MCACC’ is highlighted, use 
/ to select 
the MCACC preset you want to check.
The level of the various channels set at the selected 
MCACC preset is displayed. ‘---’ is displayed for channels 
that are not connected.
Speaker Distance
Use this to display the distance from the different 
channels to the listening position. See Speaker Distance 
on page 116 for more on this.
1
Select ‘Speaker Distance’ from the MCACC Data 
Check menu.
2
When ‘MCACC’ is highlighted, use 
/ to select 
the MCACC preset you want to check.
The distance from the various channels set at the 
selected MCACC preset is displayed. ‘---’ is displayed for 
channels that are not connected.
Standing Wave
Use this to display the standing wave related adjustment 
values for the various MCACC memories. See Standing 
Wave on page 107 for more on this.
1
Select ‘Standing Wave’ from the MCACC Data 
Check menu.
2
When ‘Filter Channel’ is highlighted, use 
/ to 
select the channel for which you want to check 
standing wave control.
The standing wave related calibration value for the 
selected channel stored at the selected MCACC preset 
and its graph are displayed.
3
Press 
 to highlight ‘MCACC’, then use / to 
select the MCACC preset you want to check.
Acoustic Cal EQ
Use this to display the calibration values for the 
frequency response of the various channels set in the 
different MCACC presets. See Acoustic Calibration EQ 
Adjust on page 108 for more on this.
1
Select  ‘Acoustic Cal EQ’ from the MCACC Data 
Check menu.
2
When ‘Ch’ is highlighted, use 
/ to select the 
channel.
The calibration value for the frequency response of the 
selected channel stored at the selected MCACC preset 
and its graph are displayed.
3
Press 
 to highlight ‘MCACC’, then use / to 
select the MCACC preset you want to check.
Group Delay (SC-37 only)
Use this to display the calibrated speaker group delay 
results. See Better sound using Phase Control and Full 
Band Phase Control (SC-37 only) on page 63 for more on 
this.
1
Select  ‘Group Delay’ from the MCACC Data Check 
menu.
2
When ‘Channel’ is highlighted, use 
/ to select 
the channel you want to check. 
The result of group delay calibration for the selected 
channel is displayed.
When measurements have been performed with Full 
Auto MCACC selected at Advanced MCACC or with ALL 
or Full Band Phase Ctrl selected when Auto MCACC is 
selected, the graph before group delay calibration is also 
displayed.
When After is selected at Calibration, the group delay 
after calibration is displayed. Compared to when Before 
is selected, with After there is less difference in the delay 
between frequency bands and the group delay between 
the different channels is uniform, allowing you to check 
the full band phase control effect.
No Data is displayed if the selected group delay has not 
been measured.
SC-37_35_UXJCB.book  111 ページ  ２０１０年３月９日　火曜日　午前９時３２分