Pioneer SC-35 Manual De Usuario

En

The SiriusConnect™ tuner is not properly 
connected.

Check that the 8 pin mini DIN cable and AC Adapter are 
attached securely.

The SIRIUS signal is too weak at the current 
location.

Check for antenna obstructions and reposition the 
SIRIUS antenna to get better signal reception. Use the 
Antenna Aiming option to optimize the antenna position.

Unit is updating subscription.

Wait until the channel subscription has been updated.

Unit is updating the channel information.

Wait until the channel information has been updated.

Selected channel is not available/does not 
exist.

Select another channel.

The SiriusConnect™ tuner’s firmware is 
being updated.

Wait for updating to finish.

Cannot access the network.

The LAN cable is not firmly connected.

Firmly connect the LAN cable (page 38).

The router is not switched on.

Switch on the router.

Internet security software is currently installed in 
the connected component.

There are cases where a component with Internet 
security software installed cannot be accessed.

The audio component on the network which has 
been switched off is switched on.

Switch on the audio component on the network 
before switching on this receiver.

Playback does not start while 
‘Connecting...’ continues to 
be displayed.

The component is currently disconnected from 
this receiver or the power supply.

Check whether the component is properly 
connected to this receiver or the power supply.

The PC or Internet radio is not 
properly operated.

The corresponding IP address is not properly set. Switch on the built-in DHCP server function of 

your router, or set up the network manually 
according to your network environment 
(page 117).

The IP address is being automatically configured. The automatic configuration process takes time. 

Please wait.

The audio files stored on 
components on the network, 
such as a PC, cannot be 
played back.

Windows Media Player 11 or Windows Media 
Player 12 is not currently installed on your PC.

Install Windows Media Player 11 or Windows 
Media Player 12 on your PC (page 64).

Audio files were recorded in formats other than 
MP3, WAV (LPCM only), MPEG-4 AAC, FLAC, and 
WMA.

Play back audio files recorded in MP3, WAV 
(LPCM only), MPEG-4 AAC, FLAC, or WMA. Note 
that some audio files recorded in these formats 
may not be played back on this receiver.

Audio files recorded in MPEG-4 AAC or FLAC are 
being played back on Windows Media Player 11 or 
Windows Media Player 12.

Audio files recorded in MPEG-4 AAC or FLAC 
cannot be played back on Windows Media Player 
11 or Windows Media Player 12. Try using another 
server. Refer to the operation manual supplied 
with your server.

The component connected to the network is not 
properly operated.

Check whether the component is affected by 
special circumstances or is in the sleep mode.

Try rebooting the component if necessary.

The component connected to the network does 
not permit file sharing.

Try changing the settings for the component 
connected to the network.

The folder stored on the component connected to 
the network has been deleted or damaged.

Check the folder stored on the component 
connected to the network.

SC-37_35_UXJCB.book  133 ページ  ２０１０年３月９日　火曜日　午前９時３２分