Furuno fcv-295 Manual De Usuario
2
1.2
Transducer
The performance of the echo sounder depends upon the transducer position. A place least affect-
ed by air bubbles should be selected since turbulence blocks the sounding path. Further, select a
place least influenced by engine noise. It is known that air bubbles are fewest at the place where
the bow first falls and the next wave rises, at usual cruising speed.
ed by air bubbles should be selected since turbulence blocks the sounding path. Further, select a
place least influenced by engine noise. It is known that air bubbles are fewest at the place where
the bow first falls and the next wave rises, at usual cruising speed.
Note: The face of the transducer must be facing the sea bottom in normal cruising trim of the boat.
1.3
Water Temperature/Speed Sensor
Transom mount water temperature sensor T-02MTB
• Fix the cable at a convenient location on the transom with the cable clamp.
• When the cable is led through the transom board, make a hole of approx. 17 mm in diameter to
• When the cable is led through the transom board, make a hole of approx. 17 mm in diameter to
pass the connector. After passing the cable, seal the hole with a sealing compound.
How to mount transom mount water temperature sensor T-02MTB
D>500
D
5x20
Flush with hull bottom
[Units: mm]
70
35