Garmin Flight Deck 100 Manual De Usuario

190-00728-04 Rev. A

Embraer Prodigy

Flight Deck 100 Pilot’s Guide

139

AUDIO PANEL AND CNS

SELECTING THE RADIO TO BE TUNED

Press the small NAV Knob to transfer the frequency tuning box and Frequency Transfer Arrow between the

upper and lower radio frequency fields.

Figure 4-20 Switching NAV Tuning Boxes

Press the

NAV

Knob to

Switch the Tuning Box From

One NAV Radio to the Other

VOR/LOC ID

When the Morse code Identifier audio is on for a NAV radio, a white ID appears to the left of the active

NAV frequency.

In the example shown, in order to listen to either station identifier, press the NAV1 or NAV2 Key on the

Audio Panel. Pressing the VOL/ID Knob turns off the Morse code audio only in the radio with the NAV
Tuning Box. To turn off both NAV IDs, transfer the NAV Tuning Box between NAV1 and NAV2 by pressing
the small NAV Knob and pressing the VOL/ID Knob again to turn the Morse code off in the other radio.

Figure 4-21 NAV Radio ID Indication

The Morse Code

Identifiers for the GHM

and BNA VORs are On

Station

Identifier

VOLUME

NAV Radio volume level can be adjusted from 0 to 100% using the VOL/ID Knob. Turning the knob

clockwise increases volume, counterclockwise decreases volume.

When adjusting, the level is displayed in place of the standby frequencies. Volume level indication remains

for two seconds after the change.

Figure 4-22 NAV Volume Levels

NAV Volume

Level Remains

for Two Seconds