Garmin Flight Deck 100 Manual De Usuario

190-00728-04  Rev. A

501

Pathways and terrain features are not a substitute for standard course and altitude deviation 

information provided by the altimeter, CDI, and VDI.

Pathways are not available when the cross-pointer (X-Pointer) flight director format is selected.

Pathways provide a three-dimensional perspective view of the selected route of flight shown as colored rectangular

boxes representing the horizontal and vertical flight path of the active flight plan. The box size represents 700 feet
wide by 200 feet tall during enroute, oceanic, and terminal flight phases. During an approach, the box width is
700 feet or one half full scale deviation on the HSI, whichever is less. The height is 200 feet or one half full scale
deviation on the VDI, whichever is less. The altitude at which the pathway boxes are displayed is determined by
the selected altitude during climb, cruise, and when the active leg is the final approach course prior to intercepting
the glidepath/glideslope. During a descent (except while on the approach glidepath/glideslope), the pathway boxes
are displayed at the selected altitude, or the VNAV altitude programmed for the active leg in the flight plan, or the
published altitude constraint, whichever is higher (Figure 8-4). Just prior to intercepting the glidepath/glideslope,
the pathway boxes are displayed on the glidepath/glideslope, or the selected altitude, whichever is lower.

The color of the rectangular boxes may be magenta, green, or white depending on the route of flight and navigation

source selected. The active GPS or GPS overlay flight plan leg is represented by magenta boxes that correspond to
the Magenta CDI. A localizer course is represented by green boxes that correspond to a green CDI. An inactive
leg of an active flight plan is represented by white boxes corresponding to a white line drawn on the Inset map or
MFD map indicating an inactive leg.