Garmin Flight Deck 100 Manual De Usuario

190-00728-04  Rev. A

632

PTK FAIL – Parallel track unavailable: 
past IAF.

IAF waypoint for parallel offset has been passed.

UNABLE V WPT – Can’t reach 
current vertical waypoint.

The current vertical waypoint can not be reached within the maximum flight path angle and 
vertical speed constraints.  The system automatically transitions to the next vertical waypoint.

VNV – Unavailable.  Unsupported 
leg type in flight plan.

The lateral flight plan contains a procedure turn, vector, or other unsupported leg 
type prior to the active vertical waypoint.  This prevents vertical guidance to the active 
vertical waypoint.

VNV – Unavailable.  Excessive track 
angle error.

The current track angle error exceeds the limit, causing the vertical deviation to go 
invalid.

VNV – Unavailable.  Excessive 
crosstrack error.

The current crosstrack exceeds the limit, causing vertical deviation to go invalid.

VNV – Unavailable.  Parallel course 
selected.

A parallel course has been selected, causing the vertical deviation to go invalid.

NON WGS84 WPT – Do not use GPS 
navigation to [xxxx].

The position of the selected waypoint [xxxx] is not calculated based on the WGS84 
map reference datum and may be positioned in error as displayed.  Do not use GPS to 
navigate to the selected non-WGS84 waypoint.

TRAFFIC FAIL – Traffic device has 
failed.

The system is no longer receiving data from the traffic system.  The traffic device should 
be serviced.

FAILED PATH – A data path has 
failed.

A data path connected to the GDU, GSD 41, or the GIA 63/W has failed.

MAG VAR WARN – Large magnetic 
variance.  Verify all course angles. 

The GDU’s internal model cannot determine the exact magnetic variance for geographic 
locations near the magnetic poles.  Displayed magnetic course angles may differ from 
the actual magnetic heading by more than 2°.

SVS – SVS DISABLED: Out of 
available terrain region.

Synthetic Vision is disabled because the aircraft is not within the boundaries of the 
installed terrain database.

SVS – SVS DISABLED: Terrain DB 
resolution too low.

Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arc-
second or better) is not currently installed.

SCHEDULER [#] – <message>.

Message criteria entered by the user.

CHECK CRS – Database course for 
LOC1 / [LOC ID] is [CRS]°.

Selected course for LOC1 differs from published localizer course by more than 10 
degrees.

CHECK CRS – Database course for 
LOC2 / [LOC ID] is [CRS]°.

Selected course for LOC2 differs from published localizer course by more than 10 
degrees.

[PFD1, PFD2, or MFD1] CARD 
1 REM – Card 1 was removed.  
Reinsert card.

The SD card was removed from the top card slot of the specified PFD or MFD.  The SD 
card needs to be reinserted.

[PFD1, PFD2, or MFD1] CARD 
2 REM – Card 2 was removed.  
Reinsert card.

The SD card was removed from the bottom card slot of the specified PFD or MFD.  The 
SD card needs to be reinserted.

[PFD1, PFD2, or MFD1] CARD 1 
ERR – Card 1 is invalid.

The SD card in the top card slot of the specified PFD or MFD contains invalid data.

[PFD1, PFD2, or MFD1] CARD 2 
ERR – Card 2 is invalid.

The SD card in the bottom card slot of the specified PFD or MFD contains invalid data.