Garmin Flight Deck 100 Manual De Usuario
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
55
SYSTEM OVERVIEW
t
riP
s
tatistics
The odometer and trip odometer record the total mileage traveled from the last reset; these odometers can
be reset independently. Resetting the trip odometer also resets the average trip groundspeed. Maximum
groundspeed for the period of time since the last reset is also displayed.
groundspeed for the period of time since the last reset is also displayed.
Resetting trip statistics readouts:
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the MENU Key. The following reset options for trip statistics are displayed:
• Reset Trip ODOM/AVG GS—Resets trip average ground speed readout and odometer
• Reset Odometer—Resets odometer readout only
• Reset Maximum Speed—Resets maximum speed readout only
• Reset All—Resets flight timer, departure timer, odometers, and groundspeed readouts
2)
Use the FMS Knob to highlight
the desired reset option and
pr
ess the ENT Key. The selected parameters are reset
to zero and begin to display data from the point of reset.
f
light
D
ata
l
ogger
This feature is not available on the Phenom 100.
s
cheDUler
The scheduler feature can be used to enter and display reminder messages. Messages can be set to display
based on a specific date and time (event), once the message timer reaches zero (one-time; default setting),
or recurrently whenever the message timer reaches zero (periodic). Message timers set to periodic alerting
automatically reset to the original timer value once the message is displayed. When power is cycled,
messages are retained until deleted, and message timer countdown is restarted.
or recurrently whenever the message timer reaches zero (periodic). Message timers set to periodic alerting
automatically reset to the original timer value once the message is displayed. When power is cycled,
messages are retained until deleted, and message timer countdown is restarted.
Entering a scheduler message:
1) Use the FMS Knob to select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to
highlight the first empty scheduler message naming field.
4)
Enter the message text to be displayed in the Messages Window and press the ENT Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to ‘Type’.
6)
Turn the small FMS Knob to select the message alert type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8)
For periodic and one-time message, enter the timer value (HHH:MM:SS) from which to countdown and press the
ENT Key.
ENT Key.