Clearblue Boat Manual De Usuario
CLEAR BLUE HAWAII
2123 Eluwene St. Honolulu, HI 96819
TOLL FREE : 1-877-777-6708
INTERNATIONAL : 1-707-202-8346 FAX : 1-707-317-5367
www.clearbluehawaii.com
Molokai Kayak Instructions
Insert cross ribs
* Assembly Tip :
There are plastic clips along the length of the base rod, make
certain that these clips all face upwards before connecting any
cross ribs.
certain that these clips all face upwards before connecting any
cross ribs.
The securing rubber bands should be equally spaced, with one
at the open end of each base rod clip.
at the open end of each base rod clip.
The cross ribs connect at three points:
(1) To the side rods at either side through openings in the fabric
(2) To the base rod at the bottom in the center.
(1) To the side rods at either side through openings in the fabric
(2) To the base rod at the bottom in the center.
[ Assembly ]
(D)
(D)
(C)
(C)
(B2)
(B1)
(A)
-
-
-
The cross rib should be facing the correct direction, the plastic
'edge' at the top of the cross rib that locks into the base rod,
this will not 'clip' if facing the other way.
'edge' at the top of the cross rib that locks into the base rod,
this will not 'clip' if facing the other way.
-
Insert the cross ribs by connecting to one of the side rods first,
then the base rod in the center, then the remaining side. It may
require some effort to clip the parts together, this is normal and
ensures a secure design.
then the base rod in the center, then the remaining side. It may
require some effort to clip the parts together, this is normal and
ensures a secure design.
-