John Deere SB1280 Manual De Usuario

OM 0391SB1274-A 

23

1.  Raise the driveline shield (item 1). 

2.  Remove the paint from the gearbox shaft 

(item 3).  

3.  Grease the sliding sections of the driveline as 

well as the yoke.  

4.  Remove the two bolts (item 4) and the two 

nuts (item 5) from the yoke (item 3) and 
connect the driveline to the snowblower. 

 

Make sure the driveline is secure on the shaft 
by reinstalling the bolts and nuts (items 4-5) 
in the order shown and tighten according to 
the  Torque Specification Table at the end 
of the manual. 

5.  Lower the driveline shield (item 1). 

6.  Attach the driveline chain to the eyebolt  

7.  Before operating the snowblower, raise the 

parking stand from the ground. 

 

Find a level surface. Lower the parking stand. 
Remove the driveline from the tractor PTO. 
Detach the top link. Detach the right lower link 
then detach the left lower link. 

chain when storing the snowblower.