Furuno FCV-587 Manual De Usuario

1.  OPERATION

5. Enter name or latitude and longitude as 

applicable.

6. Press the MENU/ESC key to register the 

window.

7. Press the MENU/ESC key again to close 

the window.

Registered waypoints can be freely edited.

1. Open the menu, select [Data] and press 

the ENTER key.

2. Select [WPT List] and press the ENTER 

key.

3. Select the waypoint to edit and press the 

ENTER key.

4. Select the item desired and press the EN-

TER key.

5. Edit data as appropriate.
6. Press the MENU/ESC key twice to return 

to the [WPT List].

Waypoints can be erased two ways: individu-
ally or collectively. A waypoint set as destina-
tion cannot be erased.

1. Open the menu, select [Data] and press 

the ENTER key.

2. Select [WPT List] and press the ENTER 

key.

3. Select the waypoint to erase and press 

the ENTER key.

4. The message "Erase?" appears; press 

the ENTER key.

5. Select [Yes] and press the ENTER key.
6. Press the MENU/ESC key to close the 

window.

1. Open the menu, select [Data] and press 

the ENTER key.

2. Select [Delete All WPT] and press the 

ENTER key.

3. Select [Yes] and press the ENTER key.

Set a destination waypoint to show the range, 
bearing and time-to-go to that point, on the 
Nav data display. See the next section for de-
tails.

1. Open the menu, select [Data] and press 

the ENTER key.

2. Select [Go to WPT] and press the ENTER 

key.

3. Select a destination waypoint and press 

the ENTER key.

The user may arrange the nav data displays 
as desired.

1. Rotate the MODE knob to select the Nav 

data display to change. (This window is 
displayed for 10 seconds.)

2. Use S or T to select a data display win-

dow desired.

3. Use W or X to select the item to display. 

The items that can be displayed depend 
on the screen division.

 /     :  Window Selection

 /      :  Data Selection
[ENTER]  :  Set
[MENU]    :  Cancel