Furuno GP-1610CF Manual De Usuario
2-3
2.4 Adjusting Tone and
Brilliance
1. Press the TONE key. The tone and bril-
liance setting display appears.
TONE : 5
BRILL : 8
LOW HIGH
LOW HIGH
Figure 2-5 Tone and display brilliance
setting display
2. Operate t or s to adjust display tone.
3. Press ▲ or ▼ to adjust display brilliance.
Note: Tone or brilliance must be adjusted
within about 10 seconds after pressing the
TONE key or the display will be erased.
within about 10 seconds after pressing the
TONE key or the display will be erased.
2.5 Plotter Displays
There are five types of plotter displays: plot-
ter, plotter/sounder, data, graphic and high-
way.
ter, plotter/sounder, data, graphic and high-
way.
Selecting a plotter display
1. Press the PLTR key. The SELECT PLOT-
TER MODE screen appears.
SELECT PLOTTER MODE
PLTR: Sel ESC: Close
Plotter
Plotter/Sounder
Data
Graphic
Highway
Figure 2-6 Select plotter mode screen
2. Press the PLTR key again to select a plot-
ter mode. Each time the key is pressed
the mode changes in the following se-
quence:
the mode changes in the following se-
quence:
Plotter
Plotter/Sounder
Data
Highway
Graphic
You may also select a mode by pressing ▲
or ▼ and the ENT key.
or ▼ and the ENT key.
3. Press the ESC key to conclude your se-
lection.
Sample plotter displays
Plotter display
The plotter display mainly shows chart, ship's
track, waypoints, marks and various data.
track, waypoints, marks and various data.
CSE 180.0
°
SPD 16.8kt 2D
DEP 110m TMP 16.0
°
C 12:13
POS 34
°
26.345’N 135
°
41.232’E
Position
Water temperature
(Requires optional
sensor.)
(Requires optional
sensor.)
Icon
(chart)
(chart)
Course,
speed
speed
Depth
Time
GPS status
Track
Own ship
mark
mark
Course bar
Figure 2-7 Plotter display